Trusted SSL Certificate

Aeration Electrical Running Costs

This calculator estimates monthly and yearly electrical running costs for our standard Vertex aeration systems. For multiple system installations add up and enter the amperage load for all the systems to get the total electrical running cost. Your electrical costs will vary depending on your local utility charge per KWH and the pressure the system operates at. Call us for free technical support on equipment specifications and electrical costs for your specific site at 877-607-5296.


  Single Phase/115 Volt Calculator  
  Data Description Enter Data
  Amperage Under Load1   (See Table Below)  
  Run Hours Each Day2  
  Number of Months System is Operated Per Year3  
  Local Utility Charge Per Kilowatt Hour4  
  (example: 10 ¢ enter data: 0.10)    
  Results
  Kilowatt/Hours Per Month =  
  Your Approximate Yearly Cost =   
  Your Approximate Monthly Cost =  

 

Approximate Amperage Load of Vertex Aeration Systems Operating at 10 PSI.
   Operation at lower or higher PSI will raise or lower amperage slightly.
2  We recommend aeration systems run continuously 24 hours per day.
In colder climates where lakes ice over, aeration systems may be turned off
   several months of the year.
4  Enter 10¢ as an approximate charge or check a monthly utility bill and enter your local rate.



  Vertex Aeration System Amperage Load at 10 PSI:   
  Model Amps    Model Amps 
  Air 1  3.3   Air 1XL   3.3
  Air 2 4.2   Air 2XL 4.2
  Air 3 4.2   Air 3XL 8.4
  Air 4 8.4   Air 4XL 8.4
  Air 5 8.4    
  Air 6 8.4    
  Air 7 8.4