- ON SALE - Lake Aeration System: AirXL 2 ™ - $2034.90 list price
Contact us for SALE PRICE- email or phone toll free 1 877-607-5296
|
The Air 2XL™ circulates up to 16,380 GPM in deep ponds!
|
The Vertex Air 2XL™ is a super-efficient, affordable and safe system for circulating up to 16,380 GPM.
(circulation rates test results) In a typical lake with 8 foot depths, an Air 2XL™ can aerate approximately 4 acres depending on dissolved oxygen demand and other factors. A 1/3 hp piston compressor, housed in our rustproof outdoor cabinet, feeds two bottom mounted AirStationXL™ Diffusers each utilizing Vertex’s MicronBubble™ technology. The majority of bubbles are only 500 to 1000 microns in diameter. As bubble size decreases, oxygen transfer rates increase dramatically. The rising force of millions of bubbles circulates the entire water column, entraining bottom water up to the surface allowing vital oxygen to be absorbed. Oxygen levels are increased and kept constant throughout the entire lake, preventing drastic O2 swings that can lead to fish-kills. With no electricity in the water, Vertex’s aeration systems are safe for any type of water recreation. Our self-cleaning AirStationXL™ Diffusers allow for years of high performance, reliability, low maintenance and are covered under our five-year warranty.
|
 |
| AIRSTATIONXL |
QUIETAIR CABINET |
BENEFITS TO THE LAKE |
- Eight 9" flexible membrane discs with MicronBubble™
technology
- Self-cleaning, low maintenance, & five-year warranty
- Rugged EPDM construction
- Two vacuum formed & sonic welded HDPE base units
- Hollow design for sand ballast
- Lipped edge prevents sinking into soft bottom sediments
|
- Class "A" GFCI protection on all circuits
- Powder coated for durable attractive finish
- Heavy duty cooling fan rated at 290 CFM
- Rustproof aluminum
construction
- Easy plug-in connection to waterside electrical service
- Equipped with barrel lock for increased security
|
- Air2 XL™ systems circulate the entire water column — up to 16,380 gallons per minute depending on diffuser depth
- Increased dissolved oxygen
- Stops oxygen related fish kills by raising entire water column oxygen levels
- Reduces nutrient levels and associated algae growth
- Ends thermal stratification
- Improves fisheries by expanding oxygenated habitat
- Reduces aquatic midge and mosquito insect hatches
- Eliminates foul odors from undesirable dissolved gases
- SAFE - no electricity in the water and full GFCI protection on all circuits
|
| COMPRESSOR |
BOTTOMLINE™ TUBING |
- U.L. Listed
- 1/3 hp for exceptionally low monthly electrical cost
- Thermal overload protection
- 115 volt operation
- Two year warranty
|
- Self-weighted for easy installation
(sold separately)
- Heavy duty wall thickness (0.24") for durability
- Available in 100" increments
- Remains flexible in cold temperatures
- 15 year warranty
|
 |
|
| Brookwood™ Compressor - 1/3hp, 115v, 1 phase. Piston type built for continuous operation and equipped with thermal overload protection. Unit shall be oil-free and require no scheduled maintenance other than periodic cleaning of included air filter. Piston cups shall be carbon type for automatic adjustment and lubrication during operation to maintain optimum compressor efficiency. Unit equipped with a muffler for quiet operation, two brass outlet valves for regulation of airflow and brass pressure relief valve to prevent excessive wear on the compressor. Compressor shall produce 4.4 CFM @ 20PSI. 5.3 running amps @ 115volt. |
QuietAir™ Cabinets -Enclosure comes equipped with barrel lock for security, fully gasketed and constructed of aluminum with gray electrostatically-bonded powder coating to provide lifetime warranty against rust. Enclosure furnished with stamped ventilation grills to insure forced air circulation and an integral cooling fan with thermal protection, producing 290 CFM to guard against excessive compressor operating temperatures. Cabinet provided with HDPE mounting pad (24" x 24" x 2"). ENCLOSURE COMES WITH CLASS A GFCI PROTECTION ON BOTH THE COMPRESSOR AND FAN CIRCUITS.
|
| AirStation XL™ Assembly - Diffuser station shall consist of four self-cleaning, 9" diameter, flexible membrane diffusers of EPDM compound with 100% rebound memory, each producing millions of fine 500 to 3000 micron bubbles – the majority 500 to 1000 microns. Each diffuser station shall be equipped with vacuum-formed HDPE base, sonic spot-welded to provide unit integrity. Base unit (17.25"L x 13.25"W x 3.35"D) shall be of hollow chamber design for the addition of inert pea gravel ballast and have lipped design to prevent settling into soft bottom sediments. |
BottomLine™ Supply Tubing - (sold separately)
Self-weighted, direct burial submersible tubing for connection from compressor to diffuser stations. Tubing is flexible PVC composite construction for use with standard PVC solvent weld cement and 0.5" insert fittings. Tubing has a smooth walled, 0.60" I.D. for extra high flow rates with minimum pressure loss to reduce backpressure and extend compressor life. 0.24" tube wall thickness provides long-term durability and protection against kinking and punctures. BottomLine™ tubing remains flexible in cold temperatures allowing for easy year round installations |
|
